Does anyone have a working Ubiquiti M2 or M5 firmware?

Fri, 01/07/2011 - 00:17 — justin

I followed the walk-throughs for upgrading the Ubiquiti NS2's with no issues, however I still have issues with the M2.

There seems to be an issue on the M2 Coova integration where , although the platform is configured correctly, it will not redirect.
Rather, it will hang on the Coova redirect splash page.

So my question is...Does anyone have a working Ubiquiti M2 or M5 firmware they would be willing to share? Or perhaps the workaround you where able to develop that corrected this issue? Any help would be appreciated guys.

CoovaAP Firmware

Wed, 01/19/2011 - 18:23 — justin

Ubiquiti M2 Development Bounty Offered

The only hardware we are currently having issues with is the NanoStation M2. We have no problem paying someone here to make the M2 version work - and we would actually freely share this work here...the only requirements being it has to authenticate with our hosted wifirush server like the NS2 does (not an embedded local portal on the M2 itself) and it has to be a flawless conversion process like the NS2 was. Let me know what you can do.

Thu, 01/20/2011 - 22:01 — Beone

What's wrong with this

What's wrong with this one?
http://coova-ap.s3.amazonaws.com/ubnt/index.html
I got it working on an airrouter before.

kind regards
B

Wed, 01/26/2011 - 18:15 — justin

Could you expand on yor claim

The issue is the authentication hangs on the M series. If you don't mind B, what was the issue that you overcame to get this firmware to work for you? There are at least a dozen others perusing here who would like to know. Heck - I'll pay you to put your expertise into another effort on this if you'd like.

Fri, 02/04/2011 - 09:50 — Beone

I've tested it on the new

I've tested it on the new airrouter.
Used authentication via UAM server (so not the embedded portal), I had no issues at all to set it up. (just add uam server, radius servers, etc)
The only issue I had was bridging LAN and wireless, but hotspot on wifi was working perfect.
I will test 5.3 version this weekend and let you know how it went.

kind regards,
B

Tue, 01/18/2011 - 09:04 — Denbywireless

I'd like to see this too

I've asked before ..

Mon, 01/17/2011 - 15:18 — Sjors

Same problem Bullet M2 HP firmware is not working

I have done LOTS of attempts to get the bin

XS2.ar2316.v3.5.SDK.100122.0850.bin

In the Bullet M2 HP the problem is a message vad firmware update image.
I have treyed this on some Bullets same problem.

Current firmware is XM.v15.2.1 update to Coova is not working.

Please can someone help me out ?

Thanks Sjors

Navigation