*

CoovaAP Firmware Installation

WARNING: Flashing any third party firmware on your router may VOID the original manufacturer's warranty. Software found on this site comes WITHOUT any warrany and can only be USED AT YOUR OWN RISK.

<< prev

top

next >>

Step 3

The router will reboot. The DMZ light will come on during start-up. When the light goes out, you are ready to configure the CoovaAP Firmware. If not, try rebooting the router with a power cycle. Once in the new interface, you will be prompted to set your administration (admin and root) password. Do this now and and remember the password! When you click on any link, you will be required to authenticate.

<< prev

top

next >>